可用于塑料，鋁，鑄鐵和不銹鋼 Available in Plastic, Aluminum, Cast Iron, and
Stainless Steel
無油操作 Lube-free Operation
防凍 Anti-Freezing
幾個可更換部件 Few Replaceable Parts
zui大可靠性 Maximum Reliability
Efficient
工業垂直和水平多級冷卻液泵
特征
壓力高達400 PSI
加壓系統
一些型號提供雙放電，一個用于低容量高壓，另一個用于低壓和高容量。
可用于垂直和水平配置。
高達36“浸入中間襯套
可用安裝在10到200加侖水庫
結構材料：堅固的30級鑄鐵或316不銹鋼
內置安裝法蘭
平衡機械密封（可用碳化硅標準鎢）
以上安裝法蘭放電
NPT和1“NPT放電（可用BSPT）
自定義選項可用
Features
Pressures up to 400 PSI
Pressurized System
Some Models Offer Dual Discharges, One For Low Volume High Pressure, and Another For Low Pressure and High Volume.
Available in Vertical and Horizontal Configurations.
Up to 36" of Immersion with Intermediate Bushing
Available Mounted in 10 through 200 Gallon Reservoir
Materials of Construction: Rugged Grade 30 Cast Iron or 316 Stainless Steel
Built-In Mounting Flange
Balanced Mechanical Seal (Silicon Carbide Standard Tungsten Available)
Above Mounting Flange Discharge
NPT and 1" NPT Discharge (B.S.P.T. Available)
Custom Options Available
GUSHER工業冷卻液泵和儲罐裝置
Gusher冷卻液泵包括浸入式法蘭安裝，罐式裝置和進口機床附件替代品，以及Rumaco生產線。
浸入式
Gusher浸入式機床和工業冷卻液泵有5種基本配置：
內置安裝法蘭，水平放電
內置安裝法蘭，排放在安裝法蘭上方
水平放電 - 雙入口
垂直排放 - 單入口或雙入口
立管 - 入口型
Immersed Types
Gusher immersed type machine tool and industrial coolant pumps come in 5 basic configurations:
Built in mounting flange with horizontal discharge
Built in mounting flange with discharge above the mounting flange
Horizontal discharge - dual inlet
Vertical discharge - single or dual inlet
Stand pipe - inlet type
SC-CC系列一般服務工業泵
特征
能力達450 GPM
頭到160英尺
溫度達到180度（83度）
壓力至175 PSIG
建筑材料：鑄鐵，316不銹鋼
后退設計
NEMA標準軸電機
自動機械密封
緊湊，節省空間的緊耦合設計
不需要泵/電機對準
電機外殼：防滴漏，TEFC，防爆
電機電壓規格：3/60 / 208-230 / 460,575V
Features
Capacities to 450 GPM
Heads to 160 feet
Temperatures to 180ƒ (83ƒC)
Pressures to 175 PSIG
Materials of Construction: Cast Iron, 316 Stainless Steel
Back Pull-Out Design
NEMA Standard Shaft Motor
Self-Setting Mechanical Seal
Compact, Space Saving Close-Coupled Design
No Pump/Motor Alignment Required
Motor Enclosures: Drip Proof, TEFC, Explosion Proof
Motor Voltage Specifications: 3/60/208-230/460,575V
DIN系列
DIN泵具有工程部件互換性，可確保您輕松快速地將其轉換為符合您應用的泵組件。
特征
標準滾珠軸承座尺寸與許多泵型號的交換
入口和出口法蘭具有凸面設計，允許法蘭更為正密封。
內部泵五金材質為316不銹鋼標準。
軸套材質為316不銹鋼標準。
側端口蝸殼排水裝置，易于在維修期間拆除泵送。
泵尺寸設計符合DIN 733標準。
蝸輪入口和出口法蘭以PN16為標準。如果需要，可根據客戶要求生產。
只要更換軸套和密封壓蓋，就可以改變機械密封的尺寸
球軸承外殼鑄件設計用于壽命為球軸承的油，油脂或潤滑脂。這減少了泵零件庫存，并允許更快地交付給客戶
碳耐磨環材料是標準的
Features
Standard ball bearing housing sizes the interchange with many pump models
Inlet and outlet flanges are of raised face design, allowing for more positive sealing of flanges.
Internal pump hardware material is 316 stainless steel as standard.
Shaft sleeve material is 316 stainless steel as standard.
Side port volute drain featured for ease of pumpage removal during repair.
Pump dimensions are designed to match the DIN 733 standard.
Volute inlet and outlet flanges are to PN16 as a standard. Can be produced per customer specifications if required.
With just a change of the shaft sleeve and seal gland, the size of the mechanical seal can be changed
Ball bearing housing castings are designed for use with oil, grease or greased for life ball bearings. This reduces the pump parts inventory and allows for quicker delivery to the customer
在線客服